Note：To make sure the setup process can carry on smoothly, please disable the Power-Saving mode on the phone.

The Deco can only be set up through the Deco mobile app, which is available on Android and iOS.

Sep 20, 2014  CARA SETTING STATIC ROUTING DI CISCO PACKET TRACER – Cisco Packet Tracer merupakan aplikasi untuk mendesain jaringan, simulasi jaringan, dll. Untuk itu kami kali ini akan memposting bagaimana cara Routing static. Manfaat yang didapat jika anda menggunakan PC Router adalah Anda tidak perlu membeli router tambahan sehingga. Cara Menghubungkan Dua Router. Artikel wikiHow ini menjelaskan cara menghubungkan dua ruter (router). Dengan menghubungkan dua ruter, Anda bisa memperluas jangkauan dan jumlah koneksi maksimal yang bisa ditangani oleh jaringan internet.

Here we use Deco P7 for example.

1. Launch the Deco App

2. Log in or tap Sign Up to set up a TP-Link ID.

Note: If you already have a TP-Link Cloud account, you can log in with your account.

3. Tap “Let’s Begin”, select the Deco icon according to your Deco’s model number.

4. Unpack the contents of the box. Once you verify you have everything, click “Next”

5. Disconnect your modem’s power and tap “Next”

6. Connect one of your Deco units to your modem via Ethernet cable, and power on both devices. Tap “Next” when both devices are fully booted.

7. Wait for the ‘Internet’ light to be stable on your modem, then tap “Internet LED is stable”

8. Turn on Bluetooth on your smartphone and wait for the Deco’s LED to pulse blue. Tap “Deco’s LED is Pulsing Blue”.

Note: If the LED is not pulsing blue, press the RESET button at the bottom of the unit for one second, the LED will turn to yellow. Just wait for about 2 minutes until the LED turn to pulsing blue and go on.

9. Your smartphone will attempt to find and link to the Deco.

In case it fails to find the Deco in this step:

1) Make sure the smartphone supports Bluetooth 4.0 or later.

2) Switch to another smartphone and restart the onboarding process.

10. Assign your connected Deco to a room.

11. Deco will detect the internet connection type, which assigned by ISP.

There are 3 kinds of internet connection type: Dynamic IP, PPPOE and Static IP. If you can’t confirm this information, contact your ISP for a check.

If your ISP has VLAN settings, filling in the VLAN information then tap on “Next”.

12. Create your Wi-Fi network name and password, then connect your phone to the new Wi-Fi network, click on “Next”.

13. Deco will test internet connection, and then finish the setup process. You can select “I’m done for now” or continue adding more Deco units.

The following Wi-Fi connection methods are available:

Tamil christian cut songs download mp3. Wireless Direct allows you to connect the printer to your computer or mobile device directly without a Wi-Fi access point/router; the printer serves as a Wi-Fi access point.

1. Confirm the Wireless Direct settings of the printer. When you connect to a mobile device, use a Windows PC or Mac to confirm the settings.
   • For Windows PCs
     Connect the printer and computer with a USB cable. Start the Printer Setting Tool on your computer, and click the [Communication Settings] button. Confirm that [Wireless Direct] is selected for [Selected Interface] in the [General] tab. (This is selected as the factory default settings.)
     See the FAQ: 'Using the Communication Settings (for Windows)' for more information on the Communication Settings.
   • For Mac computers
     Connect the printer and computer with a USB cable. Start the Printer Setting Tool on your computer, and confirm that [WirelessDirect] is set to [On] in the [Wireless LAN] tab. (This is selected as the factory default settings.)
     See the FAQ: 'Using the Printer Setting Tool (for Mac)' for more information on the Printer Setting Tool.
2. Press and hold the (Wi-Fi) button on your printer for one second to turn the Wi-Fi function on.
   The (Wi-Fi) indicator starts flashing in blue once every three seconds.
3. Use your computer or mobile device to select the SSID of your printer ('DIRECT-*****_PJ-773' where '*****' is the last five digits of the product serial number) and enter the password ('773*****').
   When the connection is established, the (Wi-Fi) indicator lights in blue.
   • If you press the (Wi-Fi) button for five seconds or more, the printer will enter the WPS mode and any connection using Wireless Direct will fail.
   • You can change the printer’s network settings using the Printer Setting Tool (see the FAQ: 'Using the Printer Setting Tool)'.
   • The Printer Setting Tool also allows you to easily apply the network settings changes to multiple printers. (See Applying Setting Changes to Multiple Printers in the FAQ: 'Using the Printer Setting Tool'.)
   • You can find the serial number label on the back of the printer or in the battery cavity.
   • You cannot connect to the Internet via Wi-Fi while using Wireless Direct. To use the Internet, use a wired connection (when a computer is connected), or connect using Infrastructure Mode.

Infrastructure Mode allows you to connect the printer to a computer or mobile device via a Wi-Fi access point/router.

• Before You Begin
  First you must configure the Wi-Fi settings of your printer to communicate with your Wi-Fi access point/router. After the printer is configured, computers or mobile devices on your network will have access to the printer.
  • If you are going to connect the printer to your network, we recommend that you contact your system administrator prior to installation. You must confirm your Wi-Fi settings before you proceed with this installation.
  • To configure the Wi-Fi settings again, or if the status of the Wi-Fi connection for your printer is not clear, reset the Wi-Fi settings of the printer.
    1. Confirm that the printer is turned off.
    2. While holding down the (Feed) button, press the (Power) button three times, and then release the (Feed) button.
       The POWER indicator starts flashing in orange.
    3. Press the (Feed) button once.
  • To achieve the best results with normal everyday document printing, use the printer as close to the Wi-Fi access point/router as possible with minimal obstructions. Large objects and walls between the two devices as well as interference from other electronic devices can affect the data transfer speed of your documents.
• Connecting the printer to your Wi-Fi access point/router
  1. First, write down the SSID (network name) and password (network key) of your Wi-Fi access point/router.
  2. Connect the printer and computer with a USB cable.
  3. Press and hold the (Wi-Fi) button on your printer for one second to turn the Wi-Fi function on.
     The (Wi-Fi) indicator starts flashing in blue once every three seconds.
  4. Configure the Infrastructure Mode settings of the printer.
     • For Windows PCs
       Start the Printer Setting Tool on your computer, and click the [Communication Settings] button. Select [Wireless LAN] for [Selected Interface] in the [General] tab, and select [Infrastructure] for [Communication Mode] in [Wireless Settings] in the [Wireless LAN] tab.
       See the FAQ: 'Using the Communication Settings (for Windows)' for more information on the Communication Settings.
     • For Mac computers
       Start the Wireless Device Setup Wizard included in the Printer Driver Package, and then follow the on-screen instructions.
       If you have not downloaded the Printer Driver Package, visit the [Downloads] page to download the package. Double-click the downloaded file. The Wireless Device Setup Wizard can be found in the [Utilities] folder.
  5. Enter the SSID that you wrote down, or click [Search] and select the SSID from the displayed list.
  6. Enter the password as [Passphrase].

     The required information depends on the authentication method and encryption mode; enter only the information relevant to your network environment.

     Download Windows 7 Activator used by 32-bit and 64-bit itself a new SLIC code to insert your Windows 7 end if the Windows 7 startup, therefore, makes the MS Windows crazy to believe that Windows are reputable. Windows 7 Activator Windows 7 Loader Activator works more crack activator recently.Hay many websites that offer challenges for. Windows 7 Activator Loader Crack 2.6.2 Full. It’s a long way used for the success activation of Windows 7 of every 32-bit and 64-bit version. It uses a SLIC. Oct 07, 2015 Windows activator, Loader, Patch & Crack for all product KMS Activators; Activator Description Support. Windows 7 loader slic activation with oem crack patch download. 7/30/2018 0 Comments Also on our website you can learn many things about the Windows activation process and how to change SLIC data and certificates that may be useful for moving keys to other computers. If you have already installed, remove KB9733 Windows Update and do not install.

  7. Click [Apply].
     When the connection between the printer and your Wi-Fi access point/router is established, the (Wi-Fi) indicator lights in blue. Computers and mobile devices that are on the same network as the printer will have access to the printer.
     • To change any other network settings, use the Printer Setting Tool (see the FAQ: 'Using the Printer Setting Tool').
     • To connect your mobile device to the Wi-Fi access point/router, select the SSID and enter the password of the Wi-Fi access point/router to establish the connection between the mobile device and Wi-Fi access point/router.

If your Wi-Fi access point/router supports WPS, settings and connections can be configured easily.

1. First, confirm that your Wi-Fi access point/router has the WPS symbol.
   
2. Place your printer within the range of your Wi-Fi access point/router. The range may differ depending on your environment. See the instructions provided with your Wi-Fi access point/router.
3. Press the WPS button on your Wi-Fi access point/router, and press and hold the (Wi-Fi) button on the printer for about five seconds.
   The (Wi-Fi) indicator on the printer flashes in blue once every second.
   When the connection is established, the (Wi-Fi) indicator lights in blue. Computers and mobile devices that are on the same network as the printer will have access to the printer.

   Your printer will try to connect using WPS for two minutes. If the (Wi-Fi) button is held down for another five seconds during that time, the printer will continue trying to connect for an additional two minutes.

Ad-hoc Mode allows you to connect the printer to your computer or mobile device directly without a Wi-Fi access point/router.

1. Press and hold the (Wi-Fi) button on your printer for one second to turn the Wi-Fi function on.
   The (Wi-Fi) indicator starts flashing in blue once every three seconds.
2. Use a Windows PC or Mac to configure the Ad-hoc Mode settings of the printer.
   • For Windows PCs
     Connect the printer and your computer with a USB cable. Start the Printer Setting Tool, and click the [Communication Settings] button. Select [Wireless LAN] for [Selected Interface] in the [General] tab, and select [Ad-hoc] for [Communication Mode] in [Wireless Settings] in the [Wireless LAN] tab.
     See the FAQ: 'Using the Communication Settings (for Windows)' for more information on the Communication Settings.
   • For Mac computers
     Start the Wireless Device Setup Wizard included in the Printer Driver Package, and then follow the on-screen instructions.
     If you have not downloaded the Printer Driver Package, visit the [Downloads] page to download the package. Double-click the downloaded file. The Wireless Device Setup Wizard can be found in the [Utilities] folder.
3. Use your computer or mobile device to select the SSID of your printer and, if you set the password on the Printer Setting Tool, enter the password. When the connection is established, the (Wi-Fi) indicator lights in blue.